SmartScope MVP 400 / 600 / 620 / 700 SmartScope MVP is a cost effective video non-contact measuring machine with the functionality to operate as a multi-sensor system by combining video and touch probe. MVP systems are ideal for customers that produce differing components in small to medium batch quantities.
SmartScope MVP machines are capable of operating in manual or fully automatic modes.
Operation is sequenced via Basic-X™, intuitive, fully featured metrology software. Operators simply select the features to be measured and optimise the video image using the machine’s inbuilt zoom optics and patented LED SmartRing illumination. The machine then automatically detects feature size, position and form.
Tolerance information can be added and used in conjunction with the measured data to produce an inspection report which can be printed or stored in digital format. In addition the collected data can be used for Statistical Process Control (SPC)
Inspection sequences are recorded ‘on the fly’ to create fully automatic routines that control inspection steps, magnification and lighting to ensure that subsequent components are measured accurately, repeatably and without subjectivity.
Component images can easily be collected and stored in a variety of formats for visual defect analysis. Machine Features• Manual and fully automatic operation
• DC servo motors
• Automatic edge detection
• Superior optics including motorised 6.5:1 Zoom
• Digital colour camera
• Programmable LED SmartRing™ illumination
• Fully featured, programmable Basic-X™ metrology software
• Auto-focus facilitating accurate Z measurement
• Image collection and storage
• Multi-Sensor capability Optics, Lighting and ProbesThe SmartScope MVP has superior zoom optics, full colour imaging and advanced lighting to ensure that even the smallest feature can be viewed and inspected to the tightest of tolerances. Accurate depth measurements can also be made using OGP’s advanced auto-focus technology.
Optional touch trigger probes can be added to the MVP to provide multi-sensor capability. Each sensor can be automatically called as required and used in the same inspection routine without the need for manual intervention. This functionality delivers an amazing amount of flexibility ensuring most inspection tasks can be easily performed in just one setup. Product Specification| Measuring Range 400 (X,Y,Z) | 450 x 450 x 150mm | | Measuring Range 600 (X,Y,Z) | 610 x 450 x 150mm | | Measuring Range 620 (X,Y,Z) | 610 x 500 x 150mm | | Measuring Range 700 (X,Y,Z) | 610 x 610 x 150mm | | | | | Machine Dimensions (DWH) | 132 x 102 x 170 cm, 1300Kg | | Controller Dimensions (DWH) | 52 x 45 x 19 cm, 14Kg | | Scale Resolution | 0.5µm | | Motor Drives | DC servo motors with joystick control (X, Y, Z, Zoom) | | Worktable | Anodized with fixture holes, stage glass and 30 Kg load capacity | | | | | Zoom Lens | 6.5:1, magnification range | | Lens Attachment Options | 0.5x, 0.75x, 1.5x, 2.0x | | Illumination | LED substage, coaxial surface, programmable 8 sector/ 6 ring VectorLight™ white LED | | Camera | 1/2” Format high resolution colour CCD with 768 x 494 pixel array | | Image Processing | 256 level greyscale processing with 10:1 sub-pixel resolution | | Multi-sensor Options | Touch Probe and Tip-change rack | | | | | Power Requirements | 100-240 vac ± 5%, 50/60 Hz, 700 W | | Rated Environment | 18-23°C ± 2°C/hr, 30-80% humidity (non-condensing), vibration <0.002g below 15Hz | | Operating Environment | 5-40°C (Safe working temperature) | | Operating Environment | 20°C ± 2°C (To meet specification) | | | | | Metrology Software | Measure X™ | | Controller (Minimum Specification) | Pentium Class Processor @ 2.6 GHz, 512 MB RAM, 40 GB Hard Drive, 1.44 MB Floppy, parallel, serial and USB 2.0 ports on board 10/100 LAN CD-ROM Drive | | Operating System | Microsoft® Windows™ XP | | Software Options | MeasureFit® Plus, SmartReport® Plus, MeasureMenu™ | | | | | XY Area Accuracy 400 | E2=(3.0 + 8L/1000)µm* | | XY Area Accuracy 600 | E2=(3.5 + 8L/1000)µm* | | XY Area Accuracy 620 | E2=(7.0 + 8L/1000)µm* | | XY Area Accuracy 700 | E2=(10.0 + 8L/1000)µm* | | Z Linear Accuracy | E1=(3.5 + 8L/1000)µm* | | Z Linear Accuracy | E1=(2.5 + 8L/1000)µm* (with optional touch probe fitted) | | | | | Warranty | One Year | | Accessories | Fixture Kit, Calibration Artefacts, Rotary indexers | | | | | *Where L=measuring length in mm. Applies to thermally stable systems in rated environment, maximum zoom lens setting, 2.0x lens attachment and evenly distributed 5Kg load. Depending on load distribution, accuracy at maximum rated load may be less than standard accuracy. XY axis artefact: QVI 25 intersection grid reticle at standard measuring plane. Z axis artefact: QVI Step Gauge. |
|
Products 
