Starlite 250
Starlite non-contact measuring machines are perfect for measuring small components with tight tolerances and are ideally suited to low volume applications. These machines have been developed for customers that only require manual operation yet need repeatable, accurate measurements.
Starlite machines are manually operated by moving the component into the video field of view. The operator, using simple software tools, selects the relevant points to be measured and the software automatically detects and measures the feature. Tolerance information is then input and reported along with geometry, position and deviation from nominal. Inspection reports can be printed, saved in a digital format or used for statistical evaluation.
In addition component images can be collected and stored in a variety of formats for visual defect analysis.
The on-going measurement sequence is recorded so that subsequent parts can be inspected in the exact same way.
Superior zoom optics, full colour imaging and advanced lighting ensure that even the smallest feature can be viewed and inspected to the tightest of tolerances. Accurate depth measurements can also be made using OGP’s advanced auto-focus technology, CompuFocus™. Product Specification | Measuring Range (X,Y,Z) | 250 x 150 x 150mm | | | | | Machine Dimensions (DWH) | 56 x 46 x 81 cm, 113Kg | | Controller Dimensions (DWH) | 52 x 45 x 19 cm, 14Kg | | Crate Dimensions (DWH) | 145 x 112 x 115 cm, 220Kg | | | | | Scale Resolution | 1.0 µm | | Worktable | Hardcoat anodized with fixture holes, stage glass and 20 Kg load capacity | | Zoom Lens | Motorized 6.5:1,mag range 35x - 175x (on-screen)*, working distance 55mm | | Lens Accessories | 0.5x , 1.5x , 2.0x | | Illumination | Patented SmartRing™ white LED illuminator, substage (backlight) coaxial (through-the-lens) surface, fibre optic ring light | | Camera | High resolution colour CCD with 768 x 494 pixel array | | Image Processing | 256 level greyscale processing with 10:1 sub-pixel resolution | | | | | * Onscreen magnification depends on monitor size. Figures shown are for a typical 15” LCD monitor. | | | | Power Requirements | 100-240 vac ± 5%, 50/60 Hz, 300 W | | Rated Environment | 18-22°C ± 2°C/hr, 30-80% humidity (non-condensing), vibration <0.002g below 15Hz | | Operating Environment | 5-40°C | | Metrology Software | OGP MeasureX™ | | Computer (Minimum Specification) | Pentium Class Processor @ 2.6 GHz, 512 MB RAM, 40 GB Hard Drive, 1.44 MB Floppy, parallel, serial and USB 2.0 ports on board 10/100 LAN CD-ROM Drive | | Operating System | Microsoft® Windows™ XP | | Software Options | MeasureFit® Plus, SmartReport® Plus, MeasureMenu™, SmartCAD®, Scan-X® | | | | XY Accuracy | E2=(2.5 + 6L/1000)µm* | | Z Accuracy | E1=(7.0 + 8L/1000)µm* | | Warranty | One Year | | | | | *Where L=measuring length in mm. Applies to thermally stable systems in rated environment, maximum zoom lens setting, 2.0x lens attachment and evenly distributed 5Kg load. Depending on load distribution, accuracy at maximum rated load may be less than standard accuracy. XY axis artefact: QVI 25 intersection grid reticle at standard measuring plane. Z axis artefact: QVI Step Gauge. |
|
Products 
